Last Updated: Apr 29, 2025     Views: 4

How do I use the USB document camera?

Here are the steps to use the Ipevo VZ-R document camera to scan artwork, books, documents or other materials.

  1. Plug the document camera in to your computer.

    1. Take the smaller end of the USB cable and connect it to the USB/POWER port near the base of the camera.

    2. Plug the other end of the USB cable into a USB port on your computer.

  2. Slide the power switch down to turn the camera on.

    1. The switch is located near the bottom of the camera.

Power switch of the document camera with an arrow indicating to slide it down to the on position

  1. Wait for your computer to recognize the camera.

    1. This might take a few minutes. If your computer isn't seeing the camera, double-check that both ends of the USB cable are securely connected and that the camera is turned on.

    2. Still not working? Try restarting your computer with the camera already plugged in and turned on.

  2. Begin using the camera.

    1. Once it’s recognized, you can use any software you normally would for a camera or webcam, like the Microsoft Camera app that comes with Windows. Make sure to select the "Ipevo VZ-R" camera in your app’s settings.

    2. You can adjust the camera's focus, zoom, and rotation using the controls on the base of the camera, as well as add filters.


Other resources you may find helpful:

Details


Last updated: Apr 29, 2025

Top Header Box

Library Answers

Find answers to your library & research questions.